NOT circuit
英 [nɒt ˈsɜːkɪt]
美 [nɑːt ˈsɜːrkɪt]
网络 非电路; not电路
双语例句
- These films may not make the art-house circuit in America, but for this cinephile at least, they are funny and sophisticated and stand head and shoulders above most mainstream Hollywood films.
在美国此类电影可能不会公开放映，但至少在影迷的心中，它们诙谐幽默，意味悠长，是好莱坞主流影片所望尘莫及的。 - For booleans the bitwise operators have the same effect as the logical operators except that they do not short circuit.
对于布尔值，按位运算符具有与逻辑运算符相同的效果，只是它们不会中途短路。 - Packet-switched technology delivers a lesser quality of service, but it has the advantage of not tying up a circuit.
包交换技术提供的服务质量较差，但它的优点是不牵连到电路。 - Not only AC exciting circuit and impulse exciting circuit are designed and analyzed, but also flexible exciting circuit is built, iv.
进行了交流励磁电路与脉冲励磁电路的设计与分析，搭建了可以灵活调整的励磁电路。 - The company shall not connect any other circuit with earth except with the approval of the director of electrical and Mechanical Services and subject to such conditions as he may prescribe.
除非公司获得机电工程署署长批准，并符合他订明的条件，否则不得将其它线路与地接驳。 - Make sure to check the pipe connections and whether or not any hydraulic circuit parts are damaged before performing work, as the hydraulic circuits become highly pressurized during air bleeding.
在执行工作之前，确保检测管道连接以及是否液路中是否有零件的损坏，因为液路在充压过程中将会有高压产生。 - The design has only completed part of the exploitation design and has not designed the circuit of external collection and control.
本设计只完成了单片机部分的开发设计，没有设计外部的采集和控制电路。 - A load-break switch will switch normal load currents but will not interrupt short circuit cur-rents.
负荷开关可开断正常负荷电流但不能开断短路电流。 - Any incorrect operation of one circuit does not influence the other circuit.
一条电路的任何不正确操作不影响另一条电路。 - During the installation of ribbon heater, when one end of cable was connected to power, another end of bus bar should be sealed with matching head so that two bus bars will not have a short circuit.
电热带安装时，当电缆一端接入电源前应将母线另一端用配套的封头套封好，两条母线不得短路。 - The experiment shows that under the action of sinusoidal voltage, current flowing through the sample is mainly caused by the motion of slow polarization effect that do not obey RLC circuit equation.
实验观察到在正弦外电压作用下通过样品的电流主要是不遵从RLC电路方程的慢极化效应所提供。 - The novel circuit overcomes the shortcomings the existing TTL NOT gate circuit has.
说明了新电路如何克服现有的TTL非门电路自身的弱点，使其工作更加稳定可靠。 - The Contrivance of a Novel TTL NOT Gate Circuit
一种新型TTL非门电路的设计 - This paper reports the technologies of anti-interference, system compensation and system self-checking adopted in software design which not only simplify the circuit but also improve the sensibility and reliability of the instrument.
介绍了软件设计中所采用的抗干扰、系统补偿、系统自检等技术，达到简化电路、提高仪器的灵敏度和可靠性的目的。 - The engineering design method based on the new equivalent circuit is else presented in the paper ( 2) The working modes based on the switch on-off conditions and the states of the discharge or not in capacitance-DBD circuit are analyzed in details and the equations are deduced.
从时域对容性状态下DBD电路的工作模态进行了详细地分析，得出了电路关键参数的相关公式。 - The approach can effectively detect the harmonic and reactive currents, and it is no need to adopt the fixed frequency filters and Phase Lock Loo p ( PLL) in it, and not only its circuit configuration is simple, but also to realize it is easily.
该方法能有效地检测出单相电路的谐波电流与基波电流，且不需要采用固定频率的滤波器，不需要锁相环，电路结构简单，易于实现。 - Usage of FPGA not only shortens the development period but also reduces the cost, at the same time, makes modification and up-grade of depth logging modules more easy because it does not need any circuit changes but only certain modifications of software.
FPGA的应用不仅缩短了开发周期，而且降低了成本，同时使深度模块的修改与升级变得容易，因为它不需要改动硬件电路，只需在软件上做些修改。 - The design result indicated that not only the circuit is reliable but also the precision is very high via software and hardware emulation, and complete the design requires.
设计结果表明电路性能可靠，SD转换的精度较高，完全满足设计的要求。 - The symmetric current-mode CMOS circuits designed by using this theory not only have simpler circuit structures and correct logic functions, but also can process bi-directional signals.
应用该理论设计的对称电流型COMS电路不仅具有简单的电路结构和正确的逻辑功能，而且能处理具有双向特性的信号。 - It does not require special circuit to measure frequency, which can predigest the structure of device and improve the capability.
采用这一方法，不需要专用的测频电路，简化了该装置硬件结构，同时装置性能得到改善，测频更快速、更准确。 - High frequency switching power supply made from it can not only simplify the circuit, but also can improve the EMC characteristics and reduce the cost.
采用它制作高频开关电源，不仅简化了电路，同时可以改善电源的电磁兼容性能，且降低了制作成本。 - The algorithms of CRC need not to design circuit of hardware in addition. It improves the speed of the communications of computer's network and checks the message correctly. Software
由于CRC算法采用软件校验的方法，不需要设计另外的硬件电路，校验速度非常快，提高了计算机网络通信的速度和报文传输的准确性 - It is shown that the quantum fluctuations of both charge and magnetic flux in the circuit are relation to both not only the circuit component and the squeezed parameter but also the degree of excitation of the quantum state.
结果表明，该电路中电荷、磁通量涨落的大小不仅与电路器件及压缩参数有关，而且与量子态的激发次数有关。 - Brushless DC motor using a microprocessor as a controller, not only made the circuit is simple, improve the control of the flexibility, adaptability and control accuracy, and makes the complex control can be achieved.
用微处理器作为无刷直流电机的控制器，不仅使得电路简单，提高了控制的灵活性、适应性和控制精度，并且使得复杂的控制得以实现。 - Using multi-layer dielectric structure to design the microwave filter can not only reduce the circuit size, improve circuit integration, but also through multi-layered wiring and metal belt can easily achieve coupled capacitance and inductor between layers.
采用多层介质结构设计微波滤波器不仅可以减小电路尺寸、提高电路集成度，而且通过多层布线与金属带的层叠，可以方便地实现层与层之间电容电感的耦合。 - Carefully layout drawing is very important since parasitic effects should be decreased as much as possible in order not to degrade circuit performance.
版图设计也需要格外小心，尽量避免不必要的寄生效应，以减少性能的损耗。 - Not only the circuit of the main control system, but also the specific method of the software, is introduced.
本文不仅详细介绍了主控系统的电路设计，也给出了软件设计的具体方法。 - The new method simplifies the detection circuit as well as improves response speed of the detection algorithm for it does not require phase-locked loop circuit.
该方法不需要锁相环电路，简化了检测电路结构，且提高了检测算法的响应速度。 - It is different with traditional simulation methods, the purpose of simulation is not to verify the circuit but initial match of the internal nodes and registers of the circuit.
与传统的模拟验证方法不同，本文中采用随机仿真的目的不是对电路进行完全模拟，而是对电路内部的一些结点和寄存器进行初步匹配。 - Multiple parallel MOSFET driven by the transistor is applied in the charging and discharging control circuit. The design not only improves the circuit reliability, but also prevents the damage of reverse charging.
充电和放电控制电路采用三极管驱动多组并联的MOSFET管，不仅提高了电路的可靠性，还起到了防止蓄电池反充的保护功能。